Problems are much easier to solve if you know what the problem is! Tonight I spent a half hour digging out the door frame to our bedroom when the door knob goes in past the plate. It has never latched, and we finally got to a point where shutting our door to keep Jayden out of our stuff would be great. So I finally got to it. I kept digging, putting the plate back on, digging more… so frustraited that it wasn’t working… “IT SHOULD BE WORKING!” was all I could keep thinking. There was no way it needed to be back out that far to close… Turned out that the hole wasn’t too far in, it was too far DOWN! As soon as I noticed that – I measured the height it needed to be, and my now bigger hole was plenty big enough – and boom plate went on, and door closes no problem. Its usually a good idea to step back and look at the problem again if you don’t seem to be getting anywhere. Maybe there is a simple solution you just haven’t seen yet!